1. UV glue of UV curing equipment refers to UV curing glue, which needs UV curing. If there is no UV light, it can cure in the sun. This is relatively slow. Xcvoc led UV curing lamp only needs 5 stopwatches, and the factory produces it for 30 seconds.

 

 

 

 

 

2. As a manufacturer of UVLED curing equipment, it is natural to talk about UV curing technology.

 

 

 

 

 

 

3. At present, UV curing coatings are mainly divided into two curing technologies: point source curing and surface source curing. The point curing system focuses high light energy in a small range. The purple light of the system is located on a bendable light guide. In the three-dimensional connecting line, the optical waveguide covers the light energy in a small range. Floodlight system is the area where LED surface light source solidifies. These systems are composed of UV lamp and any LED energy-saving UV lamp beads, which make the light evenly irradiate on a large area. They can be installed at any angle, at any angle, and UV curing at any location without environmental restrictions.

 

 

 

 

 

 

4. In medical applications, the irradiation dose transferred to the components must be consistent to ensure repeatability. In the manufacturing process, each lamp bead must be manufactured by strict process to ensure the quality. The performance of LED light matrix is one of the obvious marks to distinguish the products of different manufacturers and suppliers.

 

 

 

 

 

 

5. The combination of LED, UV curing equipment including quantity, type, arrangement, power mode and even led size will have a significant impact on the system performance. Optimizing the combination of these elements results in a high power UV LED matrix. UV LED chip itself emits UV light, but the light power of the core is relatively low, and the light angle is small, so the light power can be increased by packaging.