Thermal radiation is small, the irradiator uses the light-emitting component UV-LED electric power, the spectral wavelength is 365 nm, and no infrared light is emitted, so the irradiated product surface does not rise in temperature to emit high-energy and high-purity ultraviolet light, and the new high-energy ultraviolet LED can quickly complete the curing of ultraviolet glue, greatly improving the production efficiency without preheating and instantaneous lighting, instantly reaching 100% power ultraviolet transmission. The irradiation intensity can reach 8800 mW/cm2.

 

To reduce the cost of consumables, the use time of LED can generally reach more than 20,000 hours, while the traditional mercury lamp irradiator needs to replace the lamp tube about 2,000 hours. UVLED uses cable output and no optical fiber guide. LED can reduce the cost of equipment consumables for you and improve the utilization rate of equipment. The traditional mode of UVLED curing machine can not meet the needs of customers. It has been developed for a long time. In the process, the new UV curing machine has better, more accurate, low density, high cooling characteristics to meet customer requirements.

 

The principle of UVLED curing machine is that the special glue is polymerized by ultraviolet radiation to achieve curing effect. UVLED curing machine series is a kind of mechanical equipment which composes ultraviolet strong light. It is widely used in various industries, such as electronic industry, medical industry, building materials industry, machinery industry and so on.

 

UVLED curing equipment is classified and styled, but their mechanical properties are the same, that is, used to curing UV paint or UV ink. UV curing device is composed of five parts: light source system, ventilation system, control system, transmission system and box. It is very important to select the appropriate spectrum and curing time. The common UV band of UVled curing machine is divided into UVA, UVV, UVC, UVB and so on. UVA is a common band.

 

UVLED curing machine, the corresponding glue should choose the corresponding band of UVLED curing machine, so as to improve the curing efficiency of glue, greatly enhance the efficiency of work. In addition, if you want to improve the curing efficiency, you also need to consider the UVLED UVLED ultraviolet light source intensity, temperature, power, irradiation time and other factors. Selection of appropriate parameters is a necessary condition for curing. In addition, if the curing efficiency is to be improved, the irradiation time, light intensity, temperature, power and other factors of UV-UV fixing machine need to be considered. Selection of appropriate parameters is a necessary condition for curing.

 

Futansi mainly produces UV curing lamp, UV glue dryer, UV LED point light source, UV LED line light source, UV LED surface light source, UV LED oven, UV LED curing oven, UV LED tunnel oven and UV oven.