LED UV light source irradiator does not need lamp tube preheating and does not contain toxic mercury. Compared with the traditional irradiation mode, the power consumption of the irradiator is several hundred watts, even thousands of watts. It needs to be preheated for more than 10 minutes, and the lamp tube also contains toxic substance mercury. LED-UV surface light source is a safer and more environmentally friendly alternative to traditional light source technology, which meets the requirements of energy saving and environmental protection. The output of light is stable, the illumination is stronger, the energy is higher and the uniformity is better. The instantaneous lighting can reach 100% power ultraviolet output, and the irradiation intensity can reach 8800 mW/cm2. The effective luminous efficiency is more than 10 times that of mercury lamp, which improves the working efficiency.

 

Microelectronics Industry-UV Curing Applications

 

1. Mobile phone components assembly (camera lens, receiver, microphone, housing, LCD module, touch screen coating, etc.)

 

2. Hard disk head assembly (gold wire fixing, bearing, coil, chip bonding, etc.)

 

3. DVD/Digital Camera (Lens, Lens Bonding, PCB Reinforcement)

 

4. Motor and component assembly (wire, coil fixed, coil end fixed, PTC/NTC component bonded, transformer core protected)

 

5. Semiconductor chips (moisture-proof and moisture-proof coating, crystal mask, crystal contamination inspection, exposure of ultraviolet tape, crystal polishing inspection)

 

6. Sensor Production (Gas Sensor, Photoelectric Sensor, Optical Fiber Sensor, Photoelectric Encoder, etc.)