What problems will affect the curing time of UV glue? With the wider use of UV glue, UV glue curing reflects a series of problems. The main reason is that UV glue curing is vulnerable to a variety of factors. What specific factors affect the curing time? Temperature glue type, quantity, pipe radius, temperature and wind speed, all factors can change the curing time of glue.

 

 

 

Main factors affecting curing of UV glue

 

 

 

1. Temperature: The higher the temperature, the faster the curing speed, and vice versa.

 

 

 

2. Glue Category: Fast formulation glue solidifies faster than slow formulation glue; Low viscosity glue solidifies faster than high viscosity glue.

 

 

 

3. Pipeline diameter: The bigger the radius of the pipe, the bigger the gap between the joints between the pipes, and the more glue used, the longer the drying time.

 

 

 

4. Humidity: The higher the humidity, the slower the curing rate will be. I believe we all have long-term knowledge.

 

 

 

5. Wind speed: When the wind speed at the bonding point exceeds a certain degree, the curing speed will be significantly accelerated.

 

 

 

6. Quantity of use: Excessive use of glue at room temperature will take more time to dry, because volatilization is slow, more noteworthy is that excessive glue makes more permeability, thereby impairing the integrity of the joint.

 

 

 

Futancy produces UV LED, UV LED light source, UV LED light source, UV LED curing machine, UV LED curing lamp, UV LED irradiator, UV LED point light source, UV LED line light source, UV LED surface light source, UV LED oven, UV LED curing furnace UV curing lamp, UV glue dryer, etc.