Photocuring on ceramic tiles:

 

 

 

Increase brightness, stone is easy to fade due to lack of maintenance. This product contains bright materials and fine wear-resistant particles, which can make the stone quickly absorb and regain its luster and brightness as new.

 

 

 

Long service life, good flexibility, strong re-coating, direct penetration into the stone to form a compact protective layer, to prevent wear failure, more durable protective effect

 

 

 

Excellent air permeability, not simple sealing, so it does not affect the permeability of stone, thus avoiding the internal pathological changes caused by moisture retention.

 

 

 

Anti-seepage, micro-wear-resistant particles can fill the micro-pore of stone surface, prevent oil stain and water stain infiltration, resulting in unclear stain.

 

 

 

Anti-slip, fine wear-resistant particles can make the stone surface form a wear-resistant layer, to achieve a refreshing and non-slippery effect.

 

 

 

Characteristics of UV-LED tiles curing equipment:

 

 

 

1. Green, efficient, energy-saving and environmental protection.

 

 

 

2. Production efficiency can be quickly cured under high temperature chamber, which is more efficient than the general polishing method. At present, the curing speed is 50-150 m/min, up to 300-500 m/min.

 

 

 

3. Wide range of application of UV LED lighting in addition to paper printing, but also can adapt to a large number of prints.

 

 

 

4. Excellent film-forming performance of UV LED polishing is not only high gloss, smooth.

 

 

 

5. It is a small area-saving UV LED curing device.

 

 

 

6. The coating performance is stable. Because UV polishing does not contain volatile solvents, it is not easy to change the viscosity of the coating process, so the coating stability is good and the dosage is relatively low.

 

 

 

7. Most of the resins used in solvent-based polishing coatings to avoid product adhesion are thermoplastic resins, which are affected by temperature, humidity, coating thickness and drying condition.

 

 

 

8. The technology of replacing plastic film with UV LED has been widely used in many neighbourhoods at home and abroad.

 

Futansi produces UV curing lamp, UV glue dryer, UV LED point light source, UV LED line light source, UV LED surface light source, UV LED oven, UV LED curing oven, UV LED tunnel oven and UV oven.