No thermal radiation

 

4-channel UV curing lamp high power LED does not emit infrared light. By irradiating the product surface at 5 ° C, while the traditional mercury lamp UV curing machine generally makes the product surface irradiate and heat up 60-90 ° C, which makes the product positioning displacement and poor product UV-LED curing method is suitable for thermal and high-precision bonding process requirements of plastic substrate, lens bonding and electronic products, optical fiber cable, etc.

 

 

 

 

 

environmental protection

 

The traditional curing machine of mercury lamp uses mercury lamp to light up. The lamp contains mercury. It is very troublesome to dispose of waste materials and transport them. Improper disposal will cause serious environmental pollution LED curing machine uses semiconductor light, no environmental pollution. Therefore, LED curing machine is more environmentally friendly.

 

 

 

 

Super illumination

 

High power LED chip and special optical design make ultraviolet light reach high precision and high intensity. At present, the output of ultraviolet can reach 200 ￣, 000 MW / m2. Using new optical technology and manufacturing technology, the high-intensity output and uniformity are more optimized than the traditional mercury lamp irradiation method, almost twice as much as the traditional mercury lamp irradiation method. The traditional mercury lamp point source curing machine increases the irradiation channel, resulting in the loss of energy output of a single irradiation channel. However, with LED irradiation, each irradiation head emits light independently. The irradiation energy is not affected by the increase of the channel, and remains at a large value all the time. Compared with mercury lamp, UV LED can shorten the irradiation time and improve the production efficiency because of its super concentrated illumination.

 

 

 

 

Low energy consumption

 

UV LED is 10 times more efficient than mercury lamp. At the same time, no matter whether the mercury lamp is effectively irradiated or not, the mercury lamp needs to work continuously and the power supply is always in a state of consumption. UV LED consumes power only when it is irradiated, and almost no power when it is standby. You can do a simple calculation: the power saved by the UV curing machine at each point: 270 (W) × 8 (H) × 365 (d) = 800 (KWH). It can be seen that each machine can only save thousands of yuan of electricity. Not only that, everyone can indirectly reduce 1.4 tons of carbon dioxide emissions per year by saving electricity, equivalent to the amount of cars replaced in a year.

 

 

 

 

Simple installation and space saving

 

The volume of LED curing machine is only about 1 / 5 of that of traditional curing machine. The equipment installation is simpler, reducing the high trust of the occupied area of the production site, circuit design, optical design, system optimization and component selection, realizing the consistent design concept of ST-LED, high quality, ensuring the stability, reliability and curing consistency of the equipment.

 

 

 

 

To sum up, UVLED light source has incomparable advantages compared with high-pressure mercury lamp, and 4-channel UV curing lamp is the first choice for industrial UV curing applications at present and in the future. The company has been focusing on the development and sales of offset LED curing lamp, screen printing LED curing lamp, gravure printing LED curing lamp, rotary LED curing lamp, UV glue LED curing lamp, etc.